Overview
High-Efficiency Power Protection
Provides double-conversion online protection with zero transfer time, wide input range, and advanced communication interfaces for critical applications.
Features
Characteristics
- High frequency on-line double conversion technology
- Advanced DSP and 3-level technology
- Output power factor 1.0
- Active power factor correction (APFC), input power factor up to 0.99
- High efficiency 95% (up to 98% in ECO mode)
- Advanced digital parallel technology
- Wide input voltage range (110 ~ 288 Vac) and frequency range (40 ~ 70 Hz)
- 50 / 60 Hz frequency auto sensing
- Two modes of frequency conversion: 50 Hz input / 60 Hz output or 60 Hz input / 50 Hz output
- Dual-input design, supporting independent bypass
- Flexible battery configuration (settable 16 – 20 pcs batteries)
- Digitally controlled charger
- High charging current available (Max. 12 A)
- Charging voltage and current configured by demands
- Linear derating in low voltage input reducing battery discharging times, extending the service life of battery
- Intelligent battery management, automatic floating / equalizing charge control, charger dormancy control, increasing battery life by 50%
- Ability to switch on the UPS with batteries
- Settable delayed start time when mains power is restored, reducing the impact on power grid or generator
- Fan speed varies intelligently with temperature, reducing noise and extending its service life
- Equipped with self-aging function
- Compact internal layout, miniaturized the complete unit for small footprint
- LCD+LED display, multi-functional keys operation, friendly human-machine interface
- Powerful background software for parameters configuration
- Advanced multi-platform communications: RS232, USB, RS485, SNMP and dry contacts communication interfaces
- Effective software and hardware protection function, robust self-diagnostic function, and abundant event log for check
Available Options
- RS232 and smart card slot included
- Optional parallel function, battery temperature compensation, SNMP card, USB, RS485 card, dry contacts, EMD, and SMS alarms
Technical specifications
UPS 6-10 kVA – Deltron 106 Series – technical data
| Model | Deltron 106 | Deltron 110 |
|---|---|---|
| Capacity | 6 kVA / 6000 W | 10 kVA / 10000 W |
| Input | ||
| Input wiring | Single-phase three-wire (1Φ + N + PE) | |
| Rated voltage | 208 / 220 / 230 / 240 Vac | |
| Voltage range | 110 – 176 Vac (linear derating between 50% and 100% load); 176 – 288 Vac (no derating) | |
| Rated frequency | 50 / 60 Hz (auto-sensing) | |
| Frequency range | 40 – 70 Hz | |
| Power factor | ≥ 0.99 | |
| Bypass voltage range | −40% – +15% (settable) | |
| Total harmonic distortion (THDi) | ≤ 5% | |
| Output | ||
| Output wiring | Single-phase three-wire (1Φ + N + PE) | |
| Rated voltage | 208 (PF = 0.9) / 220 / 230 / 240 Vac | |
| Voltage regulation | ±1% | |
| Frequency | Synchronized to bypass in mains mode; 50 / 60 Hz ±0.1 Hz in battery mode | |
| Waveform | Sinusoidal | |
| Power factor | 1 | |
| Total harmonic distortion (THDv) | ≤ 1% (linear load); ≤ 4% (non-linear load) | |
| Crest factor | 3:1 | |
| Overload | 105 – 110% for 10 min, 110 – 125% for 1 min, 126 – 150% for 30 s | |
| Batteries | ||
| DC voltage | 192 Vdc (192 – 240 Vdc settable) | |
| Number of battery | 16 pcs (16 – 20 settable) | |
| Inbuilt battery (standard model) | 12 V / 7 Ah × 16 | 12 V / 9 Ah × 16 |
| Charging current | Standard model: 1 A; long time model: 5 A (default), 1 – 5 A settable; 12 A (optional) | |
| Recharge time | Standard model: 90% capacity restored in 8 hours; long time model: depends on the capacity of battery | |
| System | ||
| Efficiency | ≥ 94% at 100% load, max. 95% at 60% load, ≥ 98% in ECO mode | |
| Transfer time | 0 ms | |
| Protections | Short-circuit, overload, overtemperature, battery low voltage, overvoltage, undervoltage and fan failure | |
| Max. number of parallel connections | 4 | |
| Communications | RS232 (standard), USB / RS485 / dry contacts / SNMP / battery temperature compensation (optional) | |
| Display | LCD + LED | |
| Others | ||
| Operating temperature | 0 °C – 40 °C | |
| Storage temperature | −25 °C – 55 °C (without battery) | |
| Relative humidity | 0 – 95% (non-condensing) | |
| Altitude | ≤ 1000 m, derating 1% for each additional 100 m | |
| IP rating | IP 20 | |
| Noise level at 1 m | ≤ 55 dB | ≤ 58 dB |
| Dimensions W × D × H (mm) | 191 × 465 × 711 (S), 191 × 465 × 350 (H) | 191 × 495 × 711 (S), 191 × 495 × 350 (H) |
| Packaged dimensions W × D × H (mm) | 310 × 654 × 941 (S), 318 × 595 × 475 (H) | 310 × 685 × 941 (S), 318 × 617 × 475 (H) |
| Net weight (kg) | 53 (S), 14.5 (H) | 62 (S), 16.5 (H) |
| Gross weight (kg) | 61 (S), 16 (H) | 70 (S), 18 (H) |
S = standard model with internal batteries, H = long time model for external batteries.
Downloads
Datasheets & manuals
Official Deltron documents for UPS 6-10 kVA – Deltron 106 Series. All files are PDF.
Related products
More UPS models
1-3kVA
Deltron 101 Series
High-Efficiency Power Protection
View details
10-30kVA
DS Power H
The new DS Power range UPS uses the latest DSP technology to be programmed to suit a wide variety of electrical environments without impending its performance. With the DS Power range, efficiency, reliability and functionality are enhanced to levels unattainable with the old analogue technology. This technology does not only create significant increase in MTBF, but the capability of DSP to accurately manipulate signals at very high speed permits all the UPS subsystems to be controlled with greatly increased precision.
View details
10-80kVA
DLT 300 Series
10-80kVA Online UPS are microprocessor controlled, full sine output uninterruptible power supplies produced with PWM (Pulse width modulation) and IGBT technologies. It provides uninterrupted energy for local networks, communication systems, sensitive medical devices, smart engineering measuring devices and industrial automation systems by guaranteeing safe operation thanks to its built-in inverter isolation transformer.
View details